Are you encountering a concern with your new iPhone 12 where it cannot find the service?
It can be quite frustrating to have a high-end gadget like the iPhone 12 but not be able to use it for its primary purpose – making calls or accessing the internet. However, there’s no need to panic as there are a few simple steps you can take to remove the issue.
In this article, we’ll explore some resolutions to assist users to fix the “no service” problem on their iPhone 12.
Let’s get started and make your device up and running!
Explanation of the “no service” issue on Apple iPhone 12
The iPhone 12 “no service” error is a frustrating situation that can occur due to a variety of factors.
It can be caused by hardware issues, such as an impaired SIM card or antenna, or software conflicts, like outdated carrier settings or a faulty iOS update. Additionally, certain setting changes on the iPhone 12, like Wi-Fi calling or Airplane mode, can interfere with a cellular network connection and result in the iPhone 12 “no service” problem.
Identifying and addressing the root cause of the issue is crucial in restoring reliable cellular data options on the iPhone 12.
Inspect your coverage
The most typical explanation for encountering “no service” on an iPhone 12 is poor cellular network coverage.
Checking your coverage on iPhone 12’s status bar must be the foremost action in resolving this issue.
Start by looking at the signal bars on the iPhone’s status bar. If you see only one or two signal bars, it indicates weak coverage, and you might require to think about switching to a different cellular network provider.
To review users’ coverage, you can also visit the website of your network provider and enter your ZIP code or location. The site should show you the extent of network coverage and data roaming in your region. If the coverage is weak, it might be worth trying out different areas to see if the signal improves.
Reset network settings
In case you have attempted a single one of the additional fixes and nevertheless can’t connect to your cellular network, resetting your network setting is a distinct option that might work.
Reset network settings and it will help clear any saved network connections and corresponding settings, together with Wi-Fi data, cellular network settings, and VPN and APN settings.
Take a look at this step-by-step directory on ways to reset your iPhone’s network settings:
- Proceed to iPhone’s “Settings” app.
- Scroll down and click on “General.”
- Go down similarly and choose “Reset.”
- Tap “Reset Network Settings.”
When you tap “Reset Network Settings,” your iPhone will prompt you to confirm that you want to reset network settings. If you’re sure that’s what you want to do, choose “Reset Network Settings” once more to verify.
The iPhone will then restart, and after it boots up, you’ll need to set up your network connections likewise.
Toggle airplane mode
Access airplane mode by turning it onward and off. This can often assist to resolve matters with cellular connectivity and data roaming on an iPhone 12. Airplane mode disables every wireless connection on your iPhone, including cellular data, WiFi, and Bluetooth.
By toggling airplane mode on and off, you can effectively reset your iPhone’s cellular network connection, which may usually help repair iPhone 12 “no service” problems.
To toggle airplane mode on iPhone 12, start by following these instructions:
- Lift down from the top-right corner of the iPhone to go to the Control Center.
- Access airplane mode icon to enable it. You’ll know it’s on when the plane logo turns orange in Control Center.
- Pause for a few moments and then click on the airplane mode icon likewise to disable it. The photo will turn white again in the Control Center.
By toggling airplane mode, your iPhone 12 will now be able to reconnect to your cellular services.
The necessity to update carrier settings
Carrier settings are important for iPhone 12 to connect to users’ cellular network and be capable to operate cellular data services. Carrier settings are essentially small files that contain information regarding your network provider and your account and the functional cellular bands.
Carrier settings also contain information about other mobile data-related features as well as data roaming and tethering.
Sometimes, problems with your iPhone 12’s connectivity can be due to outdated or incorrect carrier settings. In such cases, updating these settings can often resolve the matter.
To completely update users‘ carrier settings on your iPhone 12, take these measures:
- Assure that users’ iPhone 12 is joined to the internet via Wi-Fi or cellular data.
- Open “Settings.”
- Choose “General” and tap “About“.
- When an update is necessary, there will be a notification that says “Carrier Settings Update“. Tap “Update” to download and install the newer program.
- If there is no need to update, you can still try resetting your network settings or checking your coverage to see if that resolves the issue.
Updating your carrier sets is a simple yet important step that can help make your iPhone 12 properly connected to your cellular data.
It’s a great idea to scan for carrier settings updates regularly to make sure you have the latest cellular services there are. In case you continue to experience problems with your iPhone 12’s cellular data, you might need to reach your network provider or visit an Apple Store for further assistance.
Install the latest iOS update
If you’re experiencing “no service” cases on your iPhone 12, it’s worth checking to see if there’s a new iOS update known.
Occasionally, updating to the latest version of iOS can fix cellular settings and mobile data problems.
This is because updates often include bug fixes and performance improvements that can address various issues, including connectivity problems.
To look for an iOS update, proceed to your iPhone 12’s Settings and pick “General.” Then, click on “Software Update” to check if a new version of iOS is available. When an update is needed, tap “Download and Install” to begin the process. Check if iPhone is connected to a strong WiFi network and has enough battery life to complete the update.
Once the update has finished downloading, tap “Install Now” to start the installation process. Your iPhone may need to restart a few times during the update process. As soon as the update is complete, your iPhone will restart. Then you’ll be using the latest option of iOS.
Updating to the newest version of iOS is a relatively simple process, but it’s important to be sure that you have a good Wi-Fi connection and enough battery life to complete the process.
Remove and reinsert the SIM card
Removing and reinserting the SIM card is one method that might assist to resolve iPhone 12 “no service” issues on an iPhone 12. This is because the SIM card is what connects the phone to the cellular network, and if it is loose or not inserted properly, it can cause connectivity problems.
To take away and reinsert the SIM card on an iPhone 12, the first step is to locate the SIM card tray. It is typically found on the side of the phone and can be opened by inserting a small paperclip or SIM card removal tool into the tiny hole next to it. Once the tray has been ejected, gently pull the SIM card and inspect for small impairments or debris that may be affecting its ability to connect to the network.
After ensuring that the SIM card is undamaged and clean, carefully reinsert it into its place and push the tray back into the phone until it clicks into place. Once the SIM card is back in place, power on the iPhone 12 and scan if the “no service” error has been resolved.
Change it to another SIM card
If you’re experiencing iPhone 12 “no service” or a mobile data problem on the iPhone 12, using a new SIM card can help identify if the issue is with your phone or your carrier. By swapping out your current SIM card with another one, you can see if the concern persists, indicating an issue with the device, or if it resolves, indicating a network carrier problem.
To put a new SIM card on your iPhone 12, preferably, ensure that the new SIM card is compatible with your model and on the same network as your current carrier. Next, turn off your phone and locate the SIM tray using a SIM tray tool or a little paper clip. Insert the tool into the small spot next to the tray to take it.
Remove the current SIM card and insert the new SIM card with the same network into the tray. It is important to check it’s properly aligned with the tray and not upside down. Slowly push the tray heretofore into the device until it clicks into place. Turn your phone back on and wait for the phone to make a connection with the cellular network.
If your phone recognizes the new SIM card and connects to the network, it means that the problem may lie with your original SIM card or with your carrier. Additionally, be aware that using a SIM card from another carrier may result in additional charges, such as data roaming fees.
Reach your network provider or visit an Apple Store for more information on cellular data options and network coverage. You may also need to adjust your VPN and APN settings, which can be found in your phone’s cellular settings. If all else fails, a factory reset using the content and settings option or a visit to an Apple Store may be necessary to resolve the issue.
Check for physical damage
One potential reason for a “no service” error on an iPhone 12 is physical damage to the device. Drops, impacts, and other accidents can damage the internal components of the phone, including the antenna, cellular modem, SIM card slot, and more.
If any of these components are damaged, it may prevent the phone from connecting to cellular networks and cause the “no service” error.
To check for physical damage, start by examining the exterior of the phone for any cracks, dents, or other signs of trauma. These may indicate that the phone has been dropped or hit, and may suggest internal damage as well.
Next, try turning on the phone and checking the cellular signal strength in various locations. If the signal is weak or nonexistent in places where it used to be strong, this may also indicate damage to the phone’s hardware.
Finally, if the phone has been submerged in water or exposed to other liquids, this may also cause damage that prevents cellular connectivity.
If you suspect that your iPhone 12 has physical damage that is causing the “no service” error, it may be necessary to seek professional repairs. You can take your phone to an Apple Store, authorized repair center, or third-party repair shop to have it evaluated and fixed.
However, be aware that physical damage may not be covered by the phone’s warranty or insurance, and repairs can be expensive. To prevent physical damage in the future, consider using a protective case, screen protector, and other accessories to safeguard your device from accidents and impacts.
Contact your carrier
If you have tried all the troubleshooting steps and still can’t get your iPhone to connect to the network, it might be time to contact your carrier for assistance. If the issue is with the network carrier, only they can resolve it.
Before calling your carrier, make sure that your iPhone is up to date with the latest iOS and carrier settings update. Also, try restarting your iPhone, turning airplane mode on and off, and resetting the network, as these are common troubleshooting steps that carriers may ask you to try.
When calling your carrier, it’s important to be prepared with the necessary information, such as the make and model of your iPhone, the iOS version, and any error messages you have received.
You should also be prepared to describe the issue you’re experiencing and the steps you have taken to troubleshoot the problem. Your carrier may ask you to perform additional troubleshooting steps or even remotely diagnose the issue.
If the issue still can’t be resolved, your carrier may recommend that you bring your iPhone to a store for further assistance. Keep in mind that depending on your carrier’s policies, you may be responsible for any charges associated with repairs or replacements.
However, if your iPhone is still under warranty or covered by AppleCare, you may be eligible for a free repair or replacement.
Restore your iPhone
If none of the previous solutions work, restoring your iPhone 12 might be the last resort to fix the “no service” error. Restoring your device will erase all data and settings, so it is recommended to back up your mobile data before proceeding.
This method involves erasing all content and settings, then restoring them to the device.
A full restore can take some time, so ensure you have enough time to complete the process.
Before restoring your device, make sure your iPhone 12 is updated to the latest iOS version. Next, back up your data to iCloud or your computer using iTunes. Once your data is backed up, connect your iPhone to a stable and reliable Wi-Fi network.
Open “Settings,” then go to “General” and select “Reset.” Choose “Erase All Content and Settings,” then enter your passcode and confirm the action.
After you reset your iPhone, it will restart and prompt you to set up your device. Select the “Restore from iCloud Backup” or “Restore from iTunes Backup” option, depending on where you backed up your data.
If you backed up your data to iCloud, enter your Apple ID and password, then select the backup you want to restore. If you backed up your data to iTunes, connect your iPhone to your computer, then select the backup you want to restore from.
Once the backup has been restored, your iPhone 12 will restart with the Apple logo, and all the data and settings will be restored to the device. This method should help fix the “no service” error if it was caused by a software problem.
Check for outages
One possible reason for experiencing a “no service” error on your iPhone 12 could be due to network outages.
These outages can occur for a variety of reasons, such as weather conditions, maintenance work, or technical difficulties on the part of your cellular provider. When these outages happen, they can cause temporary disruption to your cellular network coverage, resulting in a “no service” message on your device.
To check if there is an outage in your area, you can start by contacting your network carrier to inquire if there is any known issue affecting the network.
Another way is to check online for any outage maps or updates provided by your carrier or other reputable sources. You can also try checking social media platforms or community forums for any updates or reports from other users in your area who might be experiencing similar issues.
It’s important to note that sometimes, outages might only affect certain parts of your carrier’s network, so you might still be able to connect to a different network.
Disable Wi-Fi calling
Wi-Fi calling can sometimes cause issues with cellular service on iPhones, leading to the “no service” error.
This can happen if the Wi-Fi calling feature is enabled and the device is unable to connect to a Wi-Fi network, which may lead to a loss of cellular network coverage. In such cases, it is recommended to disable Wi-Fi calling to resolve the issue.
To disable data roaming and Wi-Fi calling on an iPhone 12, there are a few simple steps that can be followed. First, open Settings and tap on the “Cellular” option. Next, scroll down and select “Wi-Fi Calling.”
From there, toggle the “Wi-Fi Calling on This iPhone” option to the off position. This will disable the Wi-Fi calling feature on the device, which may help resolve any cellular service issues that were being caused by it.
Disabling Wi-Fi calling may also impact other features, such as visual voicemail, so it’s a good idea to check if any other settings need to be adjusted after making this change.
Check for blocked phone numbers
One possible reason why you might be experiencing a “no service” error on your iPhone is that your phone number has been blocked by someone. This can happen if someone deliberately blocked your number, or if there was a technical issue that caused your number to be blocked by mistake.
When your number is blocked, you won’t be able to make or accept calls, transmit or receive text messages, or use mobile data and network services on your device.
To check if your phone number is blocked, there are a few things you can do. First, try calling the person who you suspect has blocked your number. If the call goes straight to voicemail or you hear a busy tone, it could be a sign that your number has been blocked.
You can also try sending a text message to the person, and if it doesn’t go through, this could be another sign that your number has been blocked.
Another way to check if your phone number is blocked is to contact your network carrier. They can check if there are any restrictions or blocks on your account that could be causing the “no service” error.
If you suspect that your phone number has been blocked by mistake, you should contact the network carrier to have the block removed. If someone has deliberately blocked your number, it’s important to respect their decision and find other ways to communicate with them.
In any case, checking for a blocked phone number is one of the steps you can take to troubleshoot the “no service” error on your iPhone.
Factory reset your iPhone
A factory reset essentially erases all data, including mobile data and settings from your phone and brings it back to its original state when it was first taken out of the box. This can be helpful if the issue is caused by software glitches or conflicts that cannot be resolved through other means.
It’s crucial to back up all important data before proceeding with a factory reset. You can do this by connecting your iPhone to a computer and creating a backup using iTunes, or by using iCloud to back up your phone wirelessly.
To factory reset your iPhone 12, follow these steps. First, go to Settings on your phone and tap on “General.” Then, scroll down and tap on “Reset.” From there, select the “Erase All Content and Settings” option.
You may be prompted to enter your passcode and confirm the action. Once you confirm the reset, your phone will begin the process of erasing all data and resetting to its original state. This can take some time, so be patient and let the process complete.
After the factory reset is complete, your iPhone 12 should turn on, and the Apple logo appears. Your iPhone 12 will be back to its original state, with all settings and data erased. You can then set up your phone as if it’s a new iPhone or restore it from a backup that you created before the reset.
Check for software conflicts
When you install or update an application, it may affect your iPhone’s operating system or network settings, leading to conflicts that can result in the loss of cellular network coverage.
Additionally, if you have installed a third-party app that interferes with the iOS system, it may cause the “no service” issue to occur. In some cases, these conflicts may also arise due to a corrupted software update or an issue with the iOS firmware.
If you suspect that software conflicts may be the cause of your iPhone 12’s “no service” error, there are several steps you can take to identify and resolve them. First, try the software update of your iOS to the latest version.
This will help you fix any bugs or glitches that may be causing the problem.
You can also try resetting your network settings, which will remove all the network settings on your iPhone and restore them to their default state. If these steps don’t work, you can try disabling any third-party apps or network services that you think may be causing the issue. In more severe cases, you may have to restore your iPhone to its original factory settings.
To identify software conflicts that may be causing the “no service” error, you can start by closing all running apps and restarting your iPhone 12. You can also try to isolate the issue by using your iPhone in safe mode. Safe mode disables all third-party apps, so you can determine if the issue is caused by a specific app or if it is a system-wide issue.
Another approach is to perform a soft reset of your iPhone 12, which can help refresh your iPhone’s memory and clear any conflicts that may be causing the “no service” issue.
Clean your SIM card
A SIM card, or Subscriber Identity Module, is a small chip that stores information about your mobile data or network carrier and helps your phone connect to the network. Over time, the SIM card can collect dirt, dust, or grime that may prevent your iPhone 12 from properly detecting the network.
To clean your SIM card, start by turning off your iPhone and removing the SIM card tray with a SIM ejector tool or a paper clip. Once you have the SIM card out, use a soft cloth or an eraser to gently clean the metal contacts on the back of the card.
Be careful not to scratch or damage the card in the process. You can also blow on the SIM card or use a can of compressed air to remove any debris.
After cleaning the SIM card, reinsert it back into the tray and make sure it’s properly aligned. Then, insert the tray back into your iPhone 12 and turn it on to check if the network services issue has been resolved. If the problem persists, you may need to contact your mobile data or network carrier to get a new SIM card.
FAQ
How do I get cell service on my iPhone 12?
To get cell service on your iPhone 12, you need to have an active cellular plan with a supported carrier, a SIM card that is activated and properly installed, and your phone’s settings configured correctly.
Why is my service not transferring to my new iPhone?
There could be several reasons why your service is not transferring to your new iPhone, such as a SIM card that is not properly installed or activated, an incorrect network setting, or an issue with your carrier’s network.
Does iPhone 12 have network issues?
Like any other phone, iPhone models can experience network issues, such as poor mobile data, “no service” errors, or dropped calls, but it is not known to have any widespread or major network issues.
Conclusion
In conclusion, experiencing a “no service” error or network connectivity issues on your new iPhone 12 can be frustrating, but there are several potential solutions to the problem.
Checking for blocked phone numbers, disabling Wi-Fi calling, cleaning your SIM card, checking for software conflicts, and performing a factory reset are all possible ways to fix the issue.
Each solution may work differently for different individuals, and some may require more technical knowledge than others. If you’re unsure about any of these solutions, it’s always best to seek assistance from a trusted professional.
Overall, maintaining the health and functionality of your iPhone 12 is crucial for ensuring a seamless user experience. By taking the necessary steps to troubleshoot and fix a network service issue, you can continue to use your device with ease and confidence.